Welcome to WordPress. This is your first post. Edit or delete it, then start writing!
Author: astekadmin
Office Manager
Office Manager Astek has an immediate opening for a full time person acting as a Office Manager. The individual’s primary responsibilities will be Invoicing and performing most of the office accounting entries. Key tasks will be Invoicing, tracking Accounts Receivable, ordering supplies, performing Shipping/Receiving functions, Inventory adjustments, answering phones and scheduling appointments. This individual will act as a personal assistant…
Test and Measurement Technician
Electronic Test and Measurement Techinician Position Astek has an immediate opening for a Test and Measurement Technician with experience working in an electronic lab environment setting up automated tests using a Test Executive Responsibilities The candidate will be responsible for using Test Executive type software (Labview,etc) to setup and make measurements on both analog and digital…
Data Sanitization
Astek A43212-SAN 32-Bay 12Gb/s Drive Sanitizer Overview The Astek A43212-SAN drive sanitizer provides fast secure block level sanitization for data centers. The Astek sanitizer enables loose drives or drives mounted in almost any carrier to connect directly to the system. Drives are safely stored in one of four trays capable of…
Electronics Technician
Electronics Technician Astek is accepting resumes for a part-time, temporary Electronics Technician reporting to Astek’s Manufacturing Engineer in Colorado Springs, CO. Electronics Technician Responsibilities: Production test processing of electronic boards and chassis Troubleshoot and repair defects in printed wiring boards and electronic chassis Inspect electronic boards to IPC class 2 requirements Perform component level…
Wafer and Packaged Die Test Engineer
Astek has a position for a Test Engineer working at both the Wafer and Packaged Die level. The individual will be responsible for developing test programs for high-speed electronic components. The candidate must be able to understand high-speed electronic circuits and create test programs for them. Ideal Candidate Will Have: BSEE or BSCE…
Astek Corporation Announces Gen3 x16 PCIe External HBA With Multiple Sideband Signal Options
Astek Corporation Announces Gen3 x16 PCIe External HBA With Multiple Sideband Signal Options Colorado Springs, Co (August 9, 2017) – Astek Corporation, a leader in storage switch technology for over 15 years, is proud to announce their A73208-PCI product, an 8Gb PCIe Gen3 external host bus adapter. ASTEK has a long history of…
Frequently Asked Questions (FAQ)
Q: How can I get started with the eGuard Development Kit? A: A Getting Started Guide is located here: www.AstekCorp.com/security Q: Will this kit work with my Arduino? A: Absolutely. At present, this kit works with any Arduino Single Board Computer (SBC) because the Hardware Abstraction Layer (HAL) has been written specifically for the Atmel…
Using eGuard with Arduino
Getting Started Unpack your eGuard IoT Security Development Kit and verify contents. Download the library from GitHub. Install eGuard with Arduino UNO Processor The following pictures shows the Astek eGuard Security device connected to an Arduino UNO processor. On Arduino UNO, the following pins are used to connect to the eGuard Security device. eGuard Signal…
eGuard Library Commands
egAuthenticate () perform an authentication operation using the eGuard device. There are multiple types of authentication operations that can be performed. Syntax egDetectDevice (authentication_type, params) Parameters authentication_type – determines the type of authentication to be performed. – AuthenticationType SYMMETRIC – authenticate using a symmetric key. PKI_DEVICE – authenticate using device private/public key pair. PKI_CHAIN …