The Astek A43212-SAN drive sanitizer provides fast secure block level sanitization for data centers. The Astek sanitizer enables loose drives or drives mounted in almost any carrier to connect directly to the system. Drives are safely stored in one of four trays capable of supporting up to 8 hard drives each with speeds up to 1GBs per drive. Supported drives include SAS/SATA, HDD/SSD, and 2.5”/3.5” form factors. The Astek sanitizer greatly simplifies the data center sanitization process by with it’s drive carrier agnostic interface in a standard 4U form factor housing 32 drives.
Drive Carrier Connection
The Astek A43212-SAN Sanitizer providers independent connections to each drive whether they are mounted in or out of drive carriers. The flexibility of the Astek Sanitizer allows any carrier, regardless of manufacture or form factor, to directly connect to the sanitizer without being removed from the carrier first. It is often the case that data centers have to purchase extra servers for their sanitization area in order to avoid the overhead, of both cost and time, to remove carriers from hard drives before the sanitization is performed. Through this drive carrier flexibility, the Astek A43212-SAN saves costs on extra sanitization servers and labor-intensive drive carrier removal while providing a unique and ubiquitous interface and homogenous sanitization environment.
“Does you company purchase extra servers solely for the purpose of drive sanitization?”
“Are you constantly removing and attaching drive carriers in order to erase a drive”
The Astek A43212-SAN eliminates those costly expenses and operations with its unique and patented approach to drive connectivity. The Astek A43212-SAN Sanitizer provides independent connections to each drive whether they are mounted in or out of drive carriers. The flexibility of the Astek Sanitizer allows any carrier, regardless of manufacture or form factor, to directly connect to the sanitizer without being removed from the carrier first. Through this drive carrier flexibility, the Astek A43212-SAN saves costs on extra sanitization servers and labor-intensive drive carrier removal while providing a unique and ubiquitous interface and homogenous sanitization environment.
The A43212-SAN provides a command line interface (CLI), accessible through ethernet and an in-band HBA configuration interface. The interface provides drive status, expander configurations, and real-time management of the system. Basic status information includes firmware revisions, temperature and voltage measurements, and fan speeds.
|Supported Drive Sizes||2.5” / 3.5”|
|Supported Drive Types||HDD / SSD|
|Drive Carrier||Supports any carrier or loose drives|
|Max transfer rate per drive||1 GB/s|
|Physical Dimensions||36” x 17.35” x 7”|
|Operating Voltage||+12V +/-8%|
|PCI Power (Nominal)||22W|
Operating: 0oC to 40oC
Storage: -45°C to 105°C
5 to 90% Non-condensing
|Regulatory Certifications||Designed to be compliant to Safety standards UL-60950-1, CSA-60950-1, and IEC-60950-1. Designed to be compliant to Emissions standards EN-55022:2010/CISPR 22:2010, FCC Part 15 Subpart B Class A, ICES-003 and Immunity standard EN 55024:2010/CISPR 24:2010.|
|Warranty||Limited 1 year warranty or 200 cycles|
|Astek Ordering Part Number||A43212-SAN-01|
Copyright 2017 by Astek Corporation.
All rights reserved. Astek logo design is a registered trademark of Astek Corporation. All other brands and products names may be trademarks of their respective companies.
About Astek Corporation
Astek manufactures storage products for embedded markets including medical, telecommunications and military applications. In addition to Host Bus Adapters, Astek also supplies Serial Attached SCSI (SAS) solutions including edge and fan-out expanders.
For more information please visit the Astek web site at:
5055 Corporate Plaza Drive, Colorado Springs, Co 80919
Tel: 866-427-8351 (Toll Free) Tel: 719-260-1625 Fax: 719-260-1668